The Predator mod is the result of a collaboration between Wisemec and Sinuous Designs. It is regarded as Wisemec’s response to the Smok Alien 220W mod. The Predator looks like the Alien in many ways, it even has the same side-firing button.
The Wisemec Predator mod is a few steps ahead of the Alien is some ways. Not only can the predator produce 228 watts compared to the Alien’s 220 watts, but it can also be used as a power bank to recharge smartphones, tablets, and other small devices. The Wisemec Predator Mod is available on Vape Shop Deals where it is going for $54.99. However, you can get it for only $41.99 by using the coupon code VOL3meb4.
The design of the Wisemec Predator mod is compact and ergonomic. The chassis of the device is made of high-grade stainless steel. The dimensions of the mod are 86.7mm by 43.6mm by 29mm. There is a stainless steel 5100 threading with a spring-loaded, gold-plated pin for attaching your tank. You can fix any atomizer with a diameter of 26mm or less on the Predator without any overhang. You can fit a 30mm atty on this mod if you don’t mind a slight overhang. Just in case you are wondering, the logo that is engraved on top of the screen on this device is the logo of Sinuous Designs.
This Wisemec mod runs on dual 18650 batteries. Just like the Alien 220W mod, the battery compartment of the Predator mod is located under it. The mod does not come with a battery, so you have to purchase that separately. There is a switch that you have to slide up/down to lock/open the battery compartment. There is no rattle from the Predator mod when you have batteries installed in it. The mod comes with a micro USB cable for charging it. The Predator supports pass-through so you can vape while it is charging. The mod is designed with a quick charging feature which ensures that it powers up quickly. It also comes with upgradeable firmware.
As indicated above, using an RC (reverse charging) adapter, the mod can serve as a power bank. This could be useful when you want to charge your mobile devices, and there is no power source nearby. The large firing button on the side of the Wisemec Predator mod is clicky and responsive. You need some pressure to press the button, so you do not have to worry about accidentally firing it. There is an LED display on the front of the mod which is crystal clear. Below the screen, there are two buttons for changing the settings of the mod.
The operation of the Predator is not very different from other mods on the market today. You need to press the firing button five times to switch it on. When you press the button three times, you’ll access the mode menu. The mod has some other interesting features including a puff counter. The Predator mod is not only capable of temperature control, but also TCR. The resistance range that works with this mod is 0.05 ohm to 1.5 ohm in temperature control mode, and 0.1 ohm to 3.5 ohm in normal wattage mode. The temperature range of the mod is 200 to 600 degree Fahrenheit, and it is compatible with nickel, titanium, and stainless steel coil wires in temperature control mode. In wattage mode, you can fire from 1 watt to 233 watts using this mod.
The Wisemec Predator mod comes with several safety features including overheating protection, low resistance protection, 10-second cut-off, short-circuit protection, reversed pole protection, and more. Check out vapeshop.deals for more vape deals. You can get discounts on different vaping products from this retailer by using a coupon code.
Show Comments (0)