The IPVD4 is another solid mod from Pioneer. It is an improvement on the IPVD3. The IPVD4 is regarded as the apex of Pioneer’s IPV box mod design. It has a futuristic appearance and runs on an upgraded YiHi chipset.
The Pioneer IPVD4 Mod is not very bulky. It has a dimension of 78mm by 39mm by 24mm and weighs 131g. The vape mod is made out of stainless steel. It comes in matte black, bronze, and purple color. The versions of the mod with bronze and purple color have a lovely brushed finish that adds to their aesthetic appeal and gives the mod a very premium feel.
The Pioneer IPVD4 costs $39.99. You won’t find many mods on the market with such quality in the same price range. It is available on www.ecig.com. However, this vape store has run out of stock of the purple version.
As stated earlier, the mod comes with the YiHi SX130H chipset. It runs on a single rechargeable 18650 battery which can output between 7W to 80W. Unlike other mods that you would find on the market, the battery compartment of the IPV4 is not at its base. Instead, it’s on its side. You simply have to remove a magnetic door to access the battery compartment. This allows you to fix your batteries easily as you can clearly see whether you are setting the positive and negative poles in the right place. What’s more, thanks to the magnetic battery cover, there is no rattle when you shake the device. Overall, it feels very compact.
You can use the Pioneer IPVD4 Mod in either the power or joules mode. It can be fired as low as 0.5ohm. Using it in joules mode allows you to control the temperature of the mod. In the joules mode, it has a resistance range of 0.05ohm to 0.5ohm. However, in the power mode, it has a resistance of 0.15ohm to 3.0ohm. The IPVD4 comes with an auto ohm meter, which automatically detects the resistance of your coil once you install it. The mod is compatible with nickel, stainless steel, and titanium wire coils. It supports a temperature range of 100 degrees Celsius to 300 degrees Celsius (212 degrees Fahrenheit to 572 degrees Fahrenheit).
Unlike most vape mods where you have the fire button, an OLED screen and then two additional buttons to control the settings of the device, the IPVD4 has a slightly different design. The Pioneer IPVD4 has a power button with two other buttons for changing the settings of the mod. Under this setup is a small OLED screen. As usual, the screen displays information such as battery power, resistance, and voltage. The Pioneer logo is engraved under the screen.
There is a stainless steel threaded 510 spring connector on top of the IPVD4 for fixing your atomizer. This mod works best with atomizers that have a diameter of 22mm to 23mm. If you use a larger atomizer, you’re likely to have some overhang.
Another way the Pioneer IPVD4 is unique is that it comes with an AC/USB charging cable. The charging port is located at the base of the mod. There are also ventilation holes under the mod to keep the battery and chip from getting overheated.
If you want a powerful mod with a cutting-edge chip from a trusted name, the Pioneer IPVD4 80w Mod would fit your needs well.
The Pioneer brand was launched by iPV Vaping Technology Co. Ltd. The company has over 6 years of experience in the vaping industry and is known for making excellent products at a reasonable price. Some of the company’s other products include the PV Air S3 atomizer, the iPV 8 mod, and the iPV Vesta mod.
Show Comments (0)